06 123 45 67
 

Industrial Exhausts Systems and Stacks

Your silent partner in complete exhaust gas systems

..:: > News

Order for new ENECO / LEKHABO project

Wednesday, 27 June 2012 13:20
Print PDF

Power supplier ENECO ordered for a new Heatstation. Timmer Architecten designed the building and Lekhabo won the contract for the technical installation.
 

We are very proud we are awarded with the order for 4 chimney's for the new Heat station in Delft (The Netherlands), location Harnaschpolder. The project consists of 3 boiler chimneys and 1 engine exhaust chimney, the connecting ducting and transition pieces for connecting the boilers and engine.
 

The chimneys are of the free standing type, only connected to the concrete floor. The height is 12m, the chimneys are fully made of stainless steel type AISI 304L.
 

Design, calculations and delivery is done by the experienced designers of Axces Industrial Stacks. Specific challenge in this project is the existing concrete floor, we have to use special dynamic Hilti anchors to connect the chimney to the floor, while there was no pre-casted anchor basket.

 

The anchors are pre-drilled in the floor before the mounting of the chimney, even with a lot of rebars in the concrete we managed to drill the anchors in the circular pattern to fit the bottom chimney flange.
 

In this specific project the clients wishes are fully taken into account in the design. The wish of the client to have 4 exactly equal chimneys, although the technical specifications are not equal, we fulfilled completely. Nice detail is the fact that the insulation plates are exactly on same height so even the horizontal insulation seems are equal!!
 

The chimneys are produced in our own production shop according specs, welding is under strict specifications and carried out by our best welders. All full penetrant welding according to WPQR and regulations stated in NEN EN 13084-7. The chimney design is done with our software according to Eurocode 1 & 3, the calculation indicated that the chimneys will have fatigue problems, so we added Tuned Mass Dampers.
 

The chimneys move (wiggle) in cross wind direction this phenomenon is called Vortex shedding.

Last Updated on Wednesday, 29 August 2012 18:23 Read more...
 

Axces Group on Linkedin

Wednesday, 27 June 2012 13:05
Print PDF


Axces Launched a new group on Linkedin the AXCES GROUP. Become a member of the Axces GROUP on linkedin your forum for technical discussions, Axces News, updates and the item "did you know".

 

Over 75 persons are connected, all members who are involved in the energy, boiler or heating industry, sign up for our group now.

Last Updated on Wednesday, 27 June 2012 13:21
 

Building a chimney in a record time

Wednesday, 27 June 2012 13:00
Print PDF

One of our clients accepted the order for a project with a very short delivery time and found in Axces Industrial Stacks a partner for the delivery of the chimney.
 

What started as a normal chimney inquire, turned into the ultimate test for our young company. Our client asked us to design and deliver a 9m stainless steel chimney and connecting ducting complete with insulation all in diameter 800mm in just 1 week.
 

What we thought was almost not possible we realized this project. Fully complying with the design specs and includingpickling passivating, a rain hood and cravat with rain collar.
 

We accepted the challenge and ………… succeeded!!!
 

The chimney was made, insulated and transported to the client in time on the day we agreed upon. With many thanks to our workers who put in some overtime another Axces Industrial Stacks client was very satisfied.

Last Updated on Wednesday, 27 June 2012 13:06
 

Spark arrestors - Type approval - Bureau Veritas

Wednesday, 20 June 2012 00:00
Print PDF


Both our Conventional spark arrestors (type SA ) as well as our new type of spark arrestor ( type CP) which work in accordance with the centrifugal principle and cross pipe principle , were tested in accordance with EN1834:1-2000 7 and obtained a Bureau Veritas type approval.

 

Last Updated on Thursday, 21 June 2012 08:11
 

Silencers tested according to RRR regulations

Sunday, 20 May 2012 11:00
Print PDF


All AXCES' exhaust gas silencers were tested in accordance with the Russian norms by RRR and obtained an offcial type approval of RRR (Russian River Register).

 

 

 

Last Updated on Thursday, 21 June 2012 08:10
 

Construction & Shipping Industry

Wednesday, 18 April 2012 11:39
Print PDF


From May 8th - 10th AXCES is present at the Construction & Shipping Industry in the "Evenementenhal" in Gorinchem, The Netherlands. You can find us at stand number 418. Each day the fair is open from 13.00 - 21.00.

Last Updated on Tuesday, 05 June 2012 13:12
 

AXCES Industrial Exhaust Systems

Tuesday, 27 March 2012 10:22
Print PDF

AXCES consists of a group of companies that provide fully-integrated exhaust systems with exhaust silencers and stacks as its corebusiness.

Total exhaust system solutions are offered by being specialized in the complete process of design, engineering, manufacturing and supply, meeting your needs with a clear focus on output, efficiency and reliability.

Over the last years, trade mark AXCES, is expanding world-wide and has become a well-known partner. A fact of which the group is very proud. In the year 2011 many important steps have been realized as a part of strategic goals.

Last Updated on Thursday, 31 May 2012 11:14
 

Industrial Stacks

Tuesday, 27 March 2012 09:52
Print PDF

New division

AXCES started a new division focused on the design and production of custommade industrial stacks. Based on the specific requirements , a wide range of different chimneys are in our scope of supply. Starting from single or double wall freestanding to guided ones, designed for all types of flue gasses and vapours.

 

Design codes

The chimneys and constructions are designed according to design codes and international standards. Including EUROCODE, DIN 4133 and CICIND. Because foundations are a critical , the anchor baskets are integrated in the design.

 

Inspections

In order to analyze whether your existing chimney is still 'healthy' a service team analysis its condition in order to conclude if their might be serious “health” problems. For each individual chimney inspection is careful analyzed and followed up by an inspection report.

 

 

Last Updated on Tuesday, 05 June 2012 13:13
 

Test Cell for Silencers

Tuesday, 27 March 2012 09:37
Print PDF

Exhaust gas silencers

In order to analyze and test the optimum acoustical results of our silencers we expand our test cell facility. During the last years we tested several configurations of different silencer types. Those tests where in a later stadia proven and certified by official institutes, for example the European DNV and the Russian RMRS. As a result trustworthy silencers are being produced, meeting the strict design and performance conditions by way of type approvals together with their certificates.

 

Momentary we are in a process of testing the optimum dimensions of parallel double resonance chambers in silencers, this in order to fine-tune on the reduction of low ignition frequency noise, which is the most dominant frequency of the engine’s sound spectrum.

Last Updated on Tuesday, 05 June 2012 13:13
 

Agencies in Russia and Singapore

Tuesday, 27 March 2012 09:21
Print PDF

In order to expand world-wide sales, AXCES set up an agreement with dealers in Asia and Russia during 2011. It resulted in the delivery of many projects both in the maritime industrie and energy market. Axces is focused to have dealers in every continent in order to provide a fast service.

 

Last Updated on Tuesday, 05 June 2012 13:14
 


Page 3 of 4
:: > News